Wisefab Rear Suspension Drop Knuckle Kit - JZA80 | Turn Style

$2,500.00

-

The main objective of the Wisefab Rear Suspension Drop Knuckle Kit for a JZA80 is to provide more grip on a lowered Supra. Either if it’s needed to maintain speed with high lock angles in drifting, or just being faster in circuit racing. The Supra rear suspension has built in anti-squat, less camber gain, higher roll center and adjustable shock motion ratio.

Here is our recommended alignment parameters:
Camber: -0,5 
Toe: 3-10mm toe in/per side

Out of stock

Description

The main objective of the Wisefab Rear Suspension Drop Knuckle Kit for a JZA80 is to provide more grip on a lowered Supra. Either if it’s needed to maintain speed with high lock angles in drifting, or just being faster in circuit racing. The Supra rear suspension has built in anti-squat, less camber gain, higher roll center and adjustable shock motion ratio.

Here is our recommended alignment parameters:
Camber: -0,5 
Toe: 3-10mm toe in/per side

  • Higher roll center (RC).
    On Supra rear suspension the RC is brought back in normal range on lowered car providing higher roll stiffness.
  • Less camber gain.
    Supra rear suspension has already a lot of camber gain at original ride height. With lowered car the camber gain gets even bigger. On Wisefab setup the camber gain is decreased to provide a better grip.
  • Anti-squat.
    Original Supra rear suspension has some negative anti-squat. That means the rear would squat a lot during acceleration. Anti-squat is changed to slightly positive to provide more stable motion at rear.
  • Adjustable spring and shock absorber motion ratio.
    The shock has 3 attachment possibilities on rear arm, which allows to change suspension stiffness and handling very quickly without changing the spring and messing up ride heights.

Kit includes:

  • Pre-set suspension control arms.
  • Knuckles with hardware.
  • Installation guide.

Other components, packaging and clearance.

  • Hub to hub length (track) is the same as original, as this is defined by halfshaft lengths.
  • This kit assumes coilovers to have enough clearance.
  • Ride height is designed to be ~80mm from front subframe to ground and rear according to front.
  • Dependent on rim width and ET, inner wheel wells need to be slightly modified.
  • Minimum rim size is 17”. We have tested the kit with 9,5”x18” ET 35
    Maximum tire size that is tested is 265/35 R18.

INSTALL GUIDE

The kit is designed and manufactured the way that after installation and toe adjustment it’s ready to use right away.

Additional information

Weight 25 lbs
Dimensions 24 × 24 × 8 in