Description

The HKS Super Power Flow Intake for an Altezza is one of the best aftermarket intakes on the market!

Fitment: TOYOTA ALTEZZA SXE10 3S-GE

Stealth frame is redesigned!

“Hyper Stealth Frame” exceeds the performance of previous Super Stealth frame.
Increasing air intake surface area by 27% improves air intake efficiency.

Bold white HKS logo printed on black anodized back plate accentuates the engine bay!

The outer edge of the funnel is securely fixed to the aluminum back plate. Use of aluminum significantly improves rigidity and durability. Alumite process improves surface of the funnel and also provides a sleek black look.

Light sports

Technology

Ambient exposure type air cleaner has larger area of induction inlet that increases intake air volume. Engine horsepower and torque become higher than a stock repiacement type.
Without air cleaner box, sporty intake sound is created.

Point

Free layout and larger inlet area will increase performance of engine.

Features

Frame Support
Fits flexibly to aluminum back plate, securely fixes hyper stealth frame. It also serves as a guide for attaching the filter to the hemispherical surface, improving maintainability such as filter replacement.

Super power flow with dry type 3-layer type
The 3-layer dry-type polyurethane filter provides high air intake efficiency, dust filtration, and long product life.
* Wet type 2 layer type exchange filter can also be used

Super Inner Frame
The cross section of the inner frame is streamlined with 16 frames parabolically placed towards the center.
Simple lightweight frame design provides smoother air flow.

Super Lip Funnel
The defining feature of the HKS Super Power Flow Intake for an Altezza intake: “Super Lip Funnel”.
Super Lip Funnel maximizes air intake surface area in the limited space in the engine bay and optimizes air intake efficiency.

How to change the SUPER POWER FLOW Filter (4 steps)

1. Take the filter out of the frame.

Release the frame bolt first and take out the filter from the frame.

2. Change the filter.

First take the used filter out. Then put the new filter into the frame as show non the photo by pushing it hard and set it for the center hold.

3. Be careful not to make a gap.

Set the filter tight to the frame. Do not try it a once but put it by step by step carefully. Try not to make any wrinkle.

4. Finally set the bolt. Put the filter in the frame tightly and set the bolt firmly. Make sure again there is no gap between the filter and the frame

* Approximate change period:

Dry type: after 6 to 12 months, or drive 6,000km to 10,000km

Wet type: after 3 to 6 months, or drive 3,000km to 5,000km

 

For proper product performance, replace the air filter element at regular intervals:

(Recommended) Replace every 6,000-10,000km or every 6-12 months.

 

* There are certain conditions where, depending on dirt buildup, the filter may need to be replaced earlier than the above recommended intervals.